Upper And Lower Limit Value Settings; Setting The Upper And Lower Limit Value Entry Method; Value Entry Setting (Direct Value Entry) - Panasonic GP-X Series User Manual

3.2 Upper and Lower Limit Value Settings

Set the upper and lower limit values for the judgment of the measured value.
Judgment is made as to the comparison between the value after display
scaling and the upper and lower limit settings. Before entering the upper limit
value, determine the display scale.
If holding measurement is selected, judgment is made as to the held value.
POINT

3.2.1 Setting the Upper and Lower Limit Value Entry Method

There are the following two methods for entering the upper and lower limit
values used for judgment of the detected value.
Value entry setting
Detection displacement
setting (teaching)

3.2.2 Value Entry Setting (Direct value entry)

Setting example
Change the upper limit value from "1.5000" to "1.4000".
<Detection state>
Upper limit value
setting mode
48
Ramco Innovations www.ramcoi.com
In the calculation mode, the result of calculation is judged.
Mode Description of action
The upper or lower limit value can be
entered directly as a digital value.
The detection displacement value is set
directly as an upper or lower limit value.
The object to be detected (workpiece)
can be used to enter the setting.
Press to select "H-thr".
Press
Press
number.
Press to set.
Phone 800-280-6933 nsales@ramcoi.com
Operation
Press in the
upper/lower limit value
setting mode.
Press and hold in
the upper/lower limit
value setting mode.
to move to another digit.
or to change the