Epson MR Series Technical Reference Manual page 107

Hardware
The following screen is displayed if the Hardware tab is clicked.
❏ [Hardware settings for]
Select the touch panel device name. Generally "Device 1" is selected.
❏ [Port]
This sets the communication port. There is usually no need to change it.
❏ [Auto Detect]
This detects the Port, the Address and the IRQ for the connected touch panel. There is
usually no need to change it.
❏ [Address]
This displays the address used. This item cannot be set here.
❏ [Irq]
This displays the IRQ used. This item cannot be set here.
❏ [Baud rate]
This displays the Baud rate used. This item cannot be set here.
❏ [Parity]
This displays the parity used. This item cannot be set here.
❏ [Data Bits]
This displays the data bit used. This item cannot be set here.
❏ [Stop Bits]
This displays the stop bit used. This item cannot be set here.
❏ [FIFO]
Sets the buffer mode. Data sent from the touch panel to the IM-800 is stored in the buffer and
processed but when the performance of the computer is low, an overrun error in which data
Rev. I
MR Series Technical Reference Manual
OS and Drivers 4-57