Installing The Serial Port Driver - Epson MR Series Technical Reference Manual

4. The [END-USER LICENSE AGREEMENT] screen is displayed. Read it through and confirm
contents. If you agree with them, press the F8 key.
5. Select the partition to set up Windows, and press the Enter key. When an unformatted
partition is selected, a confirmation screen is displayed. Execute the format according to the
instructions on the screen. After that, copying of the file starts.
6. Reboot the system again according to the instructions on the screen.
7. The [Regional and Language Options] dialog box is displayed. Confirm the setting contents
and click Next.
8. The [Personalize Your Software] dialog box is displayed. Input your name and your
organization, and then click Next.
9. The [Your Product key] dialog box is displayed. Input the 25-digit product key shown on the
COA (Certificate of Authenticity) and click Next.
10. The [Computer Name and Administrator Password] dialog box is displayed. Input the
necessary information and click Next.
11. The [Date and Time Settings] dialog box is displayed. Confirm the setting and click Next.
12. The [Networking Settings] dialog box is displayed. Select the Typical settings or the Custom
settings, and click Next.
13. The [Workgroup or Computer Domain] dialog box is displayed. Select the correct item for
the environment and click Next.
14. The system reboots automatically.
15. The [Welcome to Microsoft Windows] dialog box is displayed. Click Next.
16. Set for Internet access according to the instruction on the screen.
17. Proceed with the activate Windows according to the instruction on the screen.
18. Input the user name according to the instruction on the screen.
19. The [Thank you!] dialog box is displayed. Click Finish; Windows XP will start.
CAUTION:
Setup is executed with the VGA display.

Installing the Serial Port Driver

Note
COM1/COM2 can be used without installing the driver. If you use COM3/COM4, you need to install the
driver.
If the standby mode of the Operating System is selected, the current mode automatically changes to the
standby mode even if the data is being output to COM ports.
1. Insert the Driver CD-ROM for the IM-800 in the CD-ROM drive.
Rev. I
MR Series Technical Reference Manual
OS and Drivers 4-17