Installation for Windows NT Locally procured edition
Note
If you use Windows NT, you need to install Service Pack 6a.
Installation Procedure
If you install Windows NT Local procured edition, follow the steps below.
Operating System Installation
Inseert the CD-ROM for Windows NT and turn on the IM-800 to perform the
setup. Enter the product key of the COA package. You can set up the Network
automatically or set it up later.
Network Driver Installation
Install the software from the Driver CD-ROM for the IM-800.
Service Pack 6a Installation
Obtain Service Pack 6a and install it.
Set the HDD to the DMA mode by using Service pack 6a.
VIDEO Driver Installation
Sound Driver Installation
Serial port Driver Installation
Install the software from the Driver CD-ROM for the IM-800.
When using the DM-M820 with Touch Panel, follow the steps below.
Touch Panel Driver Installation
Install the Touch Panel Driver from the CD-ROM for the DM-M820. See
page 4-45 for the procedure.
MSR Utility Installation
When using the DM-M820 with MSR, install the MSR utilities from the
CD-ROM for the IM-800. See page 4-50.
Other software Installation
When using OPOS-ADK, APD (Windows printer drivers) and Unimini,
install the software from the Driver CD-ROM for the IM-800.
4-26 OS and Drivers
Rev. I