Disassembly And Assembly Of The Im-800 - Epson MR Series Technical Reference Manual

Disassembly and Assembly of the IM-800

This portion of the chapter provides instructions for disassembling the IM-800.
WARNING:
Wait several minutes after turning off the power and disconnecting the AC before
starting disassembly work.
This precaution is necessary because as long as this product's power supply is on,
portions of the internal circuits are charged with extremely high voltages.
CAUTION:
While the power is on, some parts inside this product reach high temperatures. Since
there is a danger of burns or other injuries, be sure to wait several minutes after turning
the power off before starting disassembly work.
Be careful not to injure yourself with the sharp edges of the metal parts of the IM-800.
Note:
There is a label with the MAC address on it on the main circuit board. (See the illustration of the main
circuit board below for the location of the label.)
9-40 Disassembly and Assembly
label with the MAC address
Rev. I