Disassembling the Base Assembly
Base Assembly(117)
Follow the steps below to disassemble the unit.
1. Disconnect the cables from the IM-800 connectors and the DC12V outlet.
2. Remove 1 screw (1049) securing the top cover of the base assembly.
3. Remove the top cover of the base assembly.
4. Remove 8 screws securing the bottom plate. Remove the bottom plate.
screw (1047)
screw (1046)
Rev. I
MR Series Technical Reference Manual
screw (1049)
top cover of the base assembly
base assembly
screw (1047)
screw (1046)
bottom plate
Disassembly and Assembly 9-5