Installing The Serial Port Driver; Installing The Touch Panel Driver, Msr Utility And The Other Devices - Epson MR Series Technical Reference Manual

6. The reboot dialog box is displayed. Confirm that [Yes, I want to restart my computer now] is
selected, and click Finish.

Installing the Serial Port Driver

Note
COM1/COM2 can be used without installing the driver. If you use COM3/COM4, you need to install the
driver.
If the standby mode of the Operating System is selected, the current mode automatically changes to the
standby mode even if the data is being output to COM ports.
1. Insert the Driver CD-ROM for IM-800 in the CD-ROM Drive. Execute \Win98\
serial\setup.exe.
Uninstalling the serial port driver
1. Select [Start Menu] - [Settings] and open the control panel.
2. Select [Add/Remove Programs] in the control panel.
3. Select [ITE887X].
4. Click Add/Remove.
5. The confirmation dialog box of the uninstalling is displayed. Click OK.
6. The reboot dialog box is displayed. Click Yes.

Installing the Touch Panel Driver, MSR Utility and the Other Devices

See the Installation of Other Drivers section on page 4-45.
4-40 OS and Drivers Rev. I