LCD Circuit Board
Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove the rear panel. (See page 9-13.)
5. Disconnect the 3 cables shown below. Remove 3 screws (1050).
screw (1050)
cable
LCD circuit
board (111)
CAUTION:
Remove the cable on the right side very carefully because its connection is not
strong.
6.
Remove the LCD circuit board.
To install, reverse the removal procedure.
9-32 Disassembly and Assembly
cable
screw (1050)
Rev. I