Supplementary Explanation For Power Management - Epson MR Series Technical Reference Manual

Table A-5 POWER MANAGEMENT SETUP menu (continued)
Items
Resume by
Alarm
Date (of Month)
Alarm
Time (hh:mm:ss)
Alarm
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT
Port
PCI PIRQ [A-D]

Supplementary Explanation for Power Management

Power-Off
The power-off function for each operating system is as follows.
DOS
Since DOS does not have any native power-off function, use one of the following methods.
❏ Set Soft-Off by PWR-BTTN to "Instant-Off" to turn the power supply off by pressing the
Power button.
❏ Use the POWER.EXE function to turn the power supply off.
❏ Make the application use the APM BIOS function to turn the power supply off.
Rev. I
Description
Use this setting to turn on the power with the alarm (date and time). Set Resume by Alarm to
the desired setting to enable or disable this function.
Enabled: Choose this to enable the alarm function.By selecting this, Date (of Month) Alarm
and Time (hh:mm:ss) Alarm can also be set.
Disabled: Choose this to disable the alarm function.This is the default setting.
Use Date (of Month) Alarm to set the appropriate date.
Use Time (hh:mm:ss) Alarm to set the appropriate time.
Once the setting is made, the power turns on or the system resumes to Full-On Mode on the
selected day and time each month.
Sets the event to reload (reset) the BIOS power management timer.
IDE primary master access (I/O trap) is generated and the power management timer is
reloaded. This is treated as a resume event from Suspend Mode.
The default setting is Enabled.
Sets the event to reload (reset) the BIOS power management timer.
IDE primary slave access (I/O trap) is generated and the power management timer is
reloaded. This is treated as a resume event from Suspend Mode.
The default setting is Disabled.
Sets the event to reload (reset) the BIOS power management timer.
IDE secondary master access (I/O trap) is generated and the power management timer is
reloaded. This is treated as a resume event from Suspend Mode.
The default setting is Disabled.
Sets the event to reload (reset) the BIOS power management timer.
IDE secondary slave access (I/O trap) is generated and the power management timer is
reloaded. This is treated as a resume event from Suspend Mode.
The default setting is Disabled.
Sets the event to reload (reset) the BIOS power management timer.
Access to the floppy disk drive, serial port 1 or 2, or the parallel port is generated and the power
management timer is reloaded. This is treated as a resume event from Suspend Mode.
The default setting is Enabled. Not compatible with PCI slots COM 3/4 ports.
Sets the event to reload (reset) the BIOS power management timer.
APCI interrupt request (I/O trap) is generated and the power management timer is reloaded.
This is treated as a resume event from Suspend Mode
The default setting is Disabled.
MR series Technical Reference Manual
BIOS Functions 5-15