Display Adjustment (Serial No. *Xxxx00Xxxx*) - Epson MR Series Technical Reference Manual

Display Adjustment (SERIAL NO. *xxxx00xxxx*)

To adjust the LCD display, use the Function and
Adjustment control buttons on the right side of the LCD
unit.
When you press the top Function control button (↑)
once, the On-Screen Display appears in the lower right-
hand corner of the screen.
To select a function in the On-Screen Display, use the ↑ and ↓ Function control buttons, as
shown in the table below. To adjust the selected function, press the + or – Adjustment control
buttons. For example, to adjust the horizontal position of the display image, press the ↑ button
twice and the ↓ button 3 times. Then adjust the image using the + and – buttons.
All settings made using the On-Screen Display are maintained even if the LCD is turned off.
Number of times to press the
Function buttons
↑ button ↓ button
1 0
Basic Setting
1
2 0
POSITION
1
2
3
4
5
6
7-2 Maintenance and Adjustment
Setting items Function
CONTRAST To adjust the contrast level of the display.
BRIGHTNESS To adjust the brightness level of the
backlight.
AUTO ADJUST To automatically adjust the picture quality
and alignment.
PHASE To adjust the screen display for focus and
clarity.
CLOCK To adjust the display pixel alignment.
H-POSITION To adjust the display position horizontally.
V-POSITION To adjust the display position vertically.
GRAPH/TEXT To select either Graphics or Text.
RESET To set the function parameters in the
position menu to the default values.
Function control
buttons
Rev. I