Ultra Dma Setting For The Hdd - Epson MR Series Technical Reference Manual

5. The Reboot dialog box is displayed. Confirm that the [Yes, I want to restart my computer
now] is selected, and click Finish.
6. After the system is restarted, the Chipset drivers are installed.
7. After installation, according to the instruction on the screen, reboot the system.
Uninstalling the chipset driver for Intel
Uninstalling cannot be done.

Ultra DMA Setting for the HDD

You can set the HDD to the DMA mode by following the steps below.
1. Select [Start Menu] - [Settings] and open the control panel.
2. Select [System] in the control panel.
3. The system Properties dialog box appears. Click the [Device Manager] tab.
4. Select "GENERIC IDE DISK TYPE47" from [Disk drives] and click Properties.
5. The GENERIC IDE DISK TYPE47 Properties dialog box appears. Click the [Settings] tab.
4-36 OS and Drivers Rev. I