Speaker - Epson MR Series Technical Reference Manual

Speaker

1. Remove the IM-800 upper case. (See page 9-42.)
2. Remove the riser frame. (See page 9-43.)
3. Remove the CD/FDD bracket. (See page 9-49.)
4. Remove the HDD bracket. (See page 9-53.)
5. Remove the Power Supply. (See page 9-67.)
6. Pull out the cable connecting the speaker from the main board.
7. Remove two screws fixing the speaker.
Note:
There is the main board which cannot connect the speaker. The way of discerning is as follows.
Main board which is able to attach the speaker
Rev. I
Speaker Connector
MR Series Technical Reference Manual
Main board which is not able to attach the speaker
Disassembly and Assembly 9-65
Speaker cable
screw