Removing the Touch Panel Assembly
Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove the front case. (See page 9-12.)
5. Remove the rear panel. (See page 9-13.)
6. Release the lock of the connector at the cable connection part. Unplug the touch panel cable
out from the cable of the touch panel board.
Cable of the touch
panel board
Touch panel cable
Note:
Be careful not to get any foreign material between the LCD and the touch panel.
Rev. I
MR Series Technical Reference Manual
Cable connection part
Disassembly and Assembly 9-35