Epson MR Series Technical Reference Manual page 282

Install the Speaker by the following procedure
1. Peel off the tape of the Speaker Spacer and paste it on the speaker.
2. Adjust the Speaker cable to the lack of the Speaker holder and put the Speaker holder on the
speaker.
3. Attach the speaker with two screws. Attach screws in the position of the following figure.
Note:
Install the cable of the speaker to become an underside.
Install the speaker so as not to touch the frame of the IM-800.
When installing the Power Supply, form the speaker cable so as not to be pinched.
9-66 Disassembly and Assembly
screw
Rev. I