Automatic Definition Data Setting Utility For Ms-Dos - Epson MR Series Technical Reference Manual

Completion messages are shown below:
Completion messages
Message
Firmware old version or invalid...
Invalid parameter
Communication error
Invalid pathname

Automatic Definition Data Setting Utility For MS-DOS

Outline
This utility automatically sets the definition information of the POS keyboard of the IM-800.
Command
Execute the command in the following format:
c:\Msrcfg\PKLOAD.EXE data-file
Processing details
This utility automatically sets the following data:
• Setting file for this utility (.PKL)
Be sure to specify the extension of the specified file because the effectiveness of the specified file
is checked with its extension. The download function of the upload file is realized by
PKUPDT2.EXE.
Note:
This utility is started from and executed on MS-DOS. (It cannot be executed from the DOS box.)
This utility uses the K/B interface for communication with the firmware. For this reason, do not operate
the MSR, or the external keyboard during the execution or an error is caused during the data
communication, and this utility cannot start in order.
Do not reset this utility or turn off the power to the main body during the execution of this utility.
Rev. I
Description
Firmware version error, etc.
Parameter error
Communication error
File error
MR Series Technical Reference Manual
OS and Drivers 4-87