Cd/Fdd Bracket - Epson MR Series Technical Reference Manual

CD/FDD Bracket

1. Remove the IM-800 upper case. (See page 9-42.)
2. Remove the CD-ROM cable (A), the audio cable (B), and the CD-ROM power cable (C)
indicated below. Then remove the screws (S13) from locations D, E and F, also indicated
below.
E
F
Note:
When you install the CD/FDD bracket, be certain that the stopper attached to the frame securely and
attached the screw to the locations D. (See the illustration above.)
3. Lift the CD/FDD bracket in the direction indicated by the arrow in the illustration below.
CD/FDD bracket
Note:
When you install the CD/FDD bracket, be certain that the 2 hooks lock securely. (See the illustration
above.)
Be careful not to pinch the cable when installing the CD/FDD bracket.
Rev. I
A
B C
dabo
MR Series Technical Reference Manual
stopper
D
Disassembly and Assembly 9-49
hooks