Switch Cable Assembly (218) - Epson MR Series Technical Reference Manual

Switch cable assembly (218)

1. Remove the IM-800 upper case. (See page 9-42.)
2. Remove the CD/FDD bracket. (See page 9-49.)
3. Disconnect switch cable assembly (218) from the connector indicated below.
power switch cable
4. Disattach the hooks of the power switch from the frame back side. (The illustration below
shows the front side of the frame.)
power switch
Note:
When you attach a power switch to the frame, be careful that it is not inside out. (The direction of the
switch is indicated in the illustration above.)
9-62 Disassembly and Assembly
Front side
hooks
Back side
Rev. I