Power Supply; Standard Model - Epson MR Series Technical Reference Manual

The dimensions of installable PCI cards are shown below:
Maximum height of parts on the soldering face:

Power Supply

The IM-800 has an ATX power supply that switches the AC input by AC voltage select switch
and does not have a switch to cut off the AC input.

Standard model

Input voltage:
Input frequency:
Input current:
Cooling fan:
MTBF:
Precautions:
1) Setting the AC input voltage switch improperly causes the following problems:
If you use 100-127 V power when the switch is set to 230, the IM-800 will not operate, but if you
change the setting to 115, the unit will operate.
If you use 200-240 V power when the switch is set to 115, the voltage power unit will be
damaged.
2) When the protective circuit of the voltage power unit performs a shutdown, the protective
circuit keeps working for a while. When this happens, unplug the power cable and wait for
about 15 seconds; then plug the cable back in.
Rev. I
210
<Part mounting face>
Maximum height of parts: 14.48
Low range 100 - 127 VAC (90 - 137 VAC)
High range 200 - 240 VAC (180 - 265 VAC)
50 ± 3 Hz / 60 ± 3 Hz
3.5 A maximum (100 - 127 VAC)
2 A maximum (200 - 240 VAC)
Air intake type, fan rotation speed is automatically changed, depending on
the temperature in the power supply unit.
200,000 hours
MR Series Technical Reference Manual
106.68
(maximum)
2.67 (maximum)
[Units:mm]
Hardware Specifications 3-5