Epson MR Series Technical Reference Manual page 252

7. Remove four screws (S05) securing the touch panel set to the front panel unit while lifting
the touch panel set.
screw (S05)
To install, reverse the removal procedure.
Note:
Attach the touch panel set (1056) after removing dust from the touch panel set and the surface of the LCD
with an air sprayer.
When reattaching the touch panel assembly, align the position of the holes in the touch panel assembly and
the front panel unit.
9-36 Disassembly and Assembly
screw (S05)
Touch panel set
(1056)
Rev. I