Windows 98 Pre-Installed Model
The HDD pre-installed with Windows 98 Second Edition is also pre-installed with the EPSON
utility software and drivers dedicated to the IM-800.
Languages are English, French, German, Spanish, and Italian.
Installation Procedure
Windows 98 Installation
When turning on the power supply, the installation starts. Enter the product
key of the W98 label pasted on the product. You can setup the Network
automatically or setup it later.
Touch Panel Driver Installation
In the case of the DM-M820 with Touch Panel, install the Touch Panel Driver
from the CD-ROM for the DM-M820. See page 4-45 for the procedure.
MSR Utility Installation
When using the DM-M820 with MSR, install the MSR utilities from
C:\backup\msrcfg folder or the Driver CD-ROM for the IM-800
Other software Installation
When using OPOS-ADK, APD (Windows printer drivers) and Unimini,
install the software from the Driver CD-ROM for the IM-800.
Formatting the hard disk
The hard disk is composed of one partition of up to 10 GB as a system area. For a hard disk of
more than 10 GB, the excess area other than the system area is not yet formatted. Use the FDISK
and FORMAT command when creating a drive in the unused area. The start-up drive has been
formatted to the following file system.
•
File system: FAT32
•
Volume label: Windows 98
Pre-installed software
❏ Microsoft Windows 98 Second Edition
❏ Intel Chipset software installation utility
Rev. I
MR Series Technical Reference Manual
OS and Drivers 4-11