Epson MR Series Technical Reference Manual page 173

TM Status
The status displayed for TM Status is as shown below. The priority status items are displayed
from high to low priority. If the device is not recognized, Disable or No communication is
displayed.
Displayed Status
Hardware Error
Paper feeding
Receipt end
Journal end
Paper near-end
Receipt near-end
Journal near-end
Cover end
Off-line
On-line
DM Status
The DM Status is displayed as either Ready or Busy. If the device is not recognized, Disable or
No communication is displayed.
Drawer Status
Drawer Status is displayed as either High or Low.
COM Ports
COM Ports displays the status of the modem signals for each serial port (COM1 to COM4). If not
allowed, Disable is displayed.
LPT1
LPT1 displays the status of the status signal for parallel port LPT1. If not allowed, Disable is
displayed.
Setup
Select Setup from the menu bar to display a pull-down menu from which the settings can be
selected.
Rev. I
Status
A hardware error occurred.
The paper is feeding.
There is no more receipt paper
There is no more journal paper
The paper is nearing its end
The receipt paper is nearing its end
The journal paper is nearing its end
The cover is open
On-line status
Off-line status
MR series Technical Reference Manual
Priority
High
Low
BIOS Functions 5-33