NEC Univerge SV8100 Features And Specifications Manual page 933

UNIVERGE SV8100
Program
Program Name
Number
15-01-01 Basic Extension Data Setup –
Extension Name
15-02-07 Multiline Telephone Basic Data
Setup – Automatic Hold for CO
lines
15-02-21 Multiline Telephone Basic Data
Setup – Virtual Extension Access
Mode (When idle Virtual
Extension key pressed)
15-02-30 Multiline Telephone Basic Data
Setup – Toll Restriction Class
15-07-01 Programmable Function Keys
15-08-01 Incoming Virtual Extension Ring
Tone Setup
15-09-01 Virtual Extension Ring
Assignment
SV8100 Features and Specifications Manual
Description/Comments
Define the extension/virtual
extension name.
When talking on a CO call and
another CO line key is pressed, the
original trunk is placed on Hold (0) or
Disconnected (1).
Determine whether a Virtual
Extension/Call Arrival Key (CAR)
should function as a DSS key, a
Virtual Extension, or a CAR key.
When DSS (0) is selected, the key
functions as a DSS key to the
extension and for incoming calls to
that extension. When Outgoing (1) is
selected, the key functions as a
virtual extension and can be used for
incoming and outgoing calls. When
Ignore (2) is selected, the key
functions as a CAR key and can
receive incoming calls only.
Select the Toll Restriction Class to be
used when placing a call from a
virtual extension.
Assign the SIE key to the Multiline
extension.
When an extension or a virtual
extension is assigned to the function
key on the key telephone, select the
ring tone when receiving a call on
that key.
For ACD CAR keys, only tone
pattern 1 (entry 0) can be used. The
remaining patterns are not checked
with this feature.
Use to assign the ringing options for
an extension Virtual Extension Key
or Virtual Extension Group Answer
Key which is defined in Program
15-07.
Assigned Data
1
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102, etc.
0 = Hold
1 = Disconnect (Cut)
(default = 1)
Virtual Extension Key
Mode
0 = DSS
1 = OTG (Outgoing)
2 = Ignore
(default = 2)
0 = Vir. Ext. (Virtual
Extension Class)
1 = Real Ext. (Real
Extension Class)
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code)
(Service Code 752 by
default)
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
4 = Incoming Ring Tone
Extension
(default = 0)
Mode 1:
0 = No Ringing
1 = Ring
(default = 0)
Issue 1.0
Level
2 3
2 - 909