NEC Univerge SV8100 Features And Specifications Manual page 519

UNIVERGE SV8100
Program
Program Name
Number
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-19 Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
20-08-20 Class of Service Options
(Outgoing Call Service) – Hot
Key Pad
20-08-21 Class of Service Options
(Outgoing Call Service) –
Automatic Trunk Seizing by
Pressing Speaker Key
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
SV8100 Features and Specifications Manual
Description/Comments
Use to define the Class of Service
(COS) for call address information.
Turns Off or On a user Class of
Service from automatically blocking
outgoing Caller ID information when
a call is placed. If block is enabled,
the system automatically inserts the
Caller ID block code 1831 (defined
in Program 14-01-21) before the
user dialed digits (this requires
Program 14-02-10 to be enabled). If
block is disabled, the system
outdials the call just as dialed by the
user.
Turns Off or On an extension ability
to display the name and number of
the extension that dialed 911 (US
Only).
Turns Off or On an extension ability
to override the trunk access map
programming for outgoing calls.
Turns Off or On an extension user
ability to activate hotline or
ringdown when pressing the
Speaker key.
Turns Off or On an extension user
ability to make a call by dialing the
number without first going off hook.
Use to define the Class of Service
(COS) for automatic trunk seizing
by pressing speaker key.
Use to define the Class of Service
(COS) for voice over to busy virtual
extension.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 495