NEC Univerge SV8100 Features And Specifications Manual page 690

Issue 1.0
ISDN – PRI Network Specific Assignment
Program
Program Name
Number
26-02-07 Dial Analysis Table for ARS/LCR
– Network Specified Parameter
Table
26-12-01 Network Specified Parameter
Table for ARS – Type of Number
26-12-02 Network Specified Parameter
Table for ARS – Numbering Plan
Identification
44-05-11 ARS/F-Route Table – Network
Specified Parameter Table
SMDR Dialed Digits for either ISDN – BRI or PRI
Program
Program Name
Number
35-02-15 SMDR Output Options – CLI/DID
Number Switching
35-02-16 SMDR Output Options – Trunk
Name or Received Dialed
Number
2 - 666
Description/Comments
Use this program to define the
network specified parameter table
for each ARS Table.
Use this program to define the
type of Number parameter for an
ISDN outgoing call.
Use this program to define the
Numbering Plan Identification
Parameter for an ISDN outgoing
call.
Use this program to define the
network specified parameter table
for each F-Route table.
Description/Comments
Determine if the CLI/DID Number
should be displayed.
Determine how the SMDR should
print incoming calls on ANI/DNIS
or DID trunks. If set to (1), ANI/
DNIS trunks can print DNIS digits,
if set to (0) trunk names are
printed instead.
For additional SMDR
Services refer to Station
Message Detail Recording
on page 2-977.
UNIVERGE SV8100
Assigned Data
1
0~16
(default = 0)
0 = System Default
1 = Unknown
2 = International No.
3 = National No.
4 = Network Specific
No.
5 = Subscriber No.
6 = Abbreviated No.
(default = 0)
0 = System Default
1 = Unknown
2 = ISDN Plan
3 = Data Plan
4 = Telex Plan
5 = National Standard
Plan
6 = Private Plan
(default = 0)
0~16
(default = 0)
Assigned Data
1
0 = CLI (CLIP)
1 = DID Calling
Number
(default = 0)
0 = Trunk Port
Name
1 = Received
Dialed Number
(default = 0)
ISDN Compatibility
Level
2 3
Level
2 3