NEC Univerge SV8100 Features And Specifications Manual page 236

Issue 1.0
Program
Program Name
Number
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-19-01 System Options for Caller ID –
Caller ID Displaying Format (If
displaying digits are more than
12 digits)
20-19-05 System ID Options for Caller ID –
Caller ID Sender Queuing Time
(Sender Wait)
20-20-01 Message Setup for Non-Caller ID
Data – Private Call
20-20-02 Message Setup for Non-Caller ID
Data – Call from Out of Service
Area
20-20-03 Message Setup for Non-Caller ID
Data – Call Information with Error
90-03-01 Save Data
2 - 212
Description/Comments
Turns Off (0) or On (1) the Caller
ID display at an extension.
Determine whether or not the
CHECK LIST message is
displayed to indicate a missed call.
Allows a busy extension ability to
Manually (0) or Automatically (1)
receive off-hook signals.
Determine whether the first 10
digits (0) or last 10 digits (1) should
be displayed when Caller ID
exceeds 12 digits.
With the Caller ID Sender Queuing
option, determine how long an
incoming call will wait in queue for
a DSP resource to become
available. If a resource becomes
available during this time, the call
immediately rings the single line
telephone with Caller ID. If the time
expires before a resource
becomes available, the system
rings the single line telephone
without Caller ID (until the queuing
time expires, the single line
telephone does not ring). If the
queuing timer is set to "0", the
system does not queue the
incoming call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as a private
call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as an out-of-
service area call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as a call
with a CID error.
Use to save the programmed data
on the SRAM and Flash ROM to
the 16MB/32MB ATA removable
Compact Flash memory card.
Also, used to save stored Caller ID
if permanently saved with service
code #*#9 (11-15-03).
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = First 10 digits
(Upper)
1 = Last 10 digits
(Lower)
(default = 0)
0~64800 (seconds)
(default = 0 seconds)
24 Alphanumeric
Characters
(default = PRIVATE)
24 Alphanumeric
Characters
(default = OUT OF
AREA)
24 Alphanumeric
Characters
(default = NO CALLER
INFO)
Dial 1 + press Hold
(Press Hold to cancel.)
Level
2 3
Caller ID