NEC Univerge SV8100 Features And Specifications Manual page 127

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
26-03-01
ARS Dial Treatments – Treatment
Code
26-04-01
ARS Class of Service
SV8100 Features and Specifications Manual
Description/Comments
Assign the Dial Treatments (1~15)
for automatic ARS dialing
translation. Assign Dial Treatments
to Service Numbers (Trunk Groups)
in Program 26-02. The ARS Dial
Treatment options are:
3
- Delete the NPA if dialed as part of
the initial call. This requires at least
eight digits in the ARS table
(Program 26-02-01).
2
- Delete the leading digit if dialed
as part of the initial call. This requires
at least eight digits in the ARS table
(Program 26-02-01).
1
- Add a leading 1 if not dialed as
part of the initial call. This requires at
least eight digits in the ARS table
(Program 26-02-01).
INPA
- Insert the NPA specified by
NPA.
DNN
- Outdial the NN number of
digits or execute the code that
follows. For example, D041234 out-
dials 124. Valid entries are 0~9,
Wnn (wait nn seconds) and P
(pause). Each digits code counts as
a digit. So for example, if a P was
added for a pause, the entry would
look like: D05P1234. This Dial
Treatment can only be added from
telephone programming.
Wnn
- Wait nn seconds.
P
- Pause in analog trunk.
R
- Redial the initially dialed number,
including any modifications.
E
- End of Dial Treatment. All Dial
Treatments must end with the E
code.
X
- When ARS is enabled, X must be
entered in the Dial Treatment for the
system to output the extension
number of the call originator to the
black box for the E911 feature (US
Only).
To allow hop-off from a CCISoIP
network, assign one of the following
dial treatment codes:
D010RE - Trunk access = 0 (e.g.
Australia)
D019RE - Trunk access = 9 (e.g.
New Zealand, USA)
Set an extension ARS Class of
Service (0~16). Automatic Route
Selection uses ARS Class of Service
when determining how to route
extension calls.
Assigned Data
24 characters maximum
(default not assigned)
#
, ,
Day/Night Mode: 1~8
Class = 0~16
(default = 0)
Issue 1.0
Level
1
2
3
2 - 103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents