NEC Univerge SV8100 Features And Specifications Manual page 630

Issue 1.0
Program
Program Name
Number
20-18-01 Service Tone Timers – Extension
Dial Tone Time
21-01-02 System Options for Outgoing
Calls – Intercom Interdigit Time
82-01-01 Incoming Ring Tone –
(01) Frequency 1
82-01-02 Incoming Ring Tone –
Frequency 2
82-01-03 Incoming Ring Tone –
Modulation
Handsfree Answerback/Forced Intercom Ringing:
Program
Program Name
Number
20-02-12 System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
20-06-01 Class of Service for Extensions
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
2 - 606
Description/Comments
After getting Intercom dial tone, a
multiline terminal user has this time
to dial the first digit of the Intercom
call.
When placing Intercom calls, users
must dial each digit within this time.
Customize the Intercom ring tone.
Customize the Intercom ring tone.
Use this program to customize the
Intercom Ring Tone modulation if
desired.
Description/Comments
Determine if an extension ICM calls
should be set as Forced Intercom
Ringing (1). If disabled (0), Intercom
calls voice-announce.
Assign Class of Service (1~15) for
extensions.
Turns Off or On an extension
allowing it to force Handsfree
Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
Turns Off or On an extension ability
to enable Handsfree Answerback or
Forced Intercom Ringing for their
incoming Intercom calls.
UNIVERGE SV8100
Assigned Data
1
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 10 seconds)
1 = 520Hz
2 = 540Hz
3 = 660Hz
4 = 760Hz
5 = 1100Hz
6 = 1400Hz
7 = 2000Hz
Default:
Refer to Table 2-17
Incoming Ringing Tone
on page 2-607
0 = No Modulation
1 = 8Hz Modulation
2 = 16Hz Modulation
3 = Envelope
2
(default = )
Assigned Data
1
0 = Disable (Voice)
1 = Enable (Signal)
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Level
2 3
Level
2 3
Intercom