NEC Univerge SV8100 Features And Specifications Manual page 503

UNIVERGE SV8100
Program
Program Name
Number
20-11-13 Class of Service Options (Hold/
Transfer Service) – Operator
Transfer After Hold Callback
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
20-11-15 Class of Service Options (Hold/
Transfer Service) – VRS
Personal Greeting (Message
Greeting)
20-11-16 Class of Service Options (Hold/
Transfer Service) – Call Redirect
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restrict
Unsupervised Conference
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
SV8100 Features and Specifications Manual
Description/Comments
Turns Off or On an extension user ability
to have a call which recalls from hold
transfer to the operator.
Turns Off or On the Trunk-to-Trunk
Transfer Restriction. If enabled,
Trunk-to-Trunk Transfer is not possible.
Turns Off or On an extension ability to
dial Service Code 4 7 to record, listen
to or erase the Personal Greeting
Message.
Turns Off or On a multiline terminal
user ability to transfer a call to a
predefined destination (such as an
operator, voice mail, or another
extension) without answering the call.
Turns Off or On an extension user
ability user in a Department Group to
use the Trunk-to-Trunk Forwarding
service codes.
Allow (0) or Deny (1) answered
Transferred calls from recalling the
originating extension
Determine whether an extension Class
of Service should allow normal or
extended Park (0 = Normal for Program
24-01-06, 1 = Extended for Program
24-01-07).
Turns Off or On an extension ability to
receive Callbacks.
Allow (0) or Deny (1) an extension user
ability to set up a tandem/conference
call automatically when they hang up.
Allow or Deny an extension user ability
to initiate a Trunk-to-Trunk Transfer
(Tandem Trunking).
In an extension Class of Service, turns
Off or On the ability to set and cancel
Call Forwarding for a CAR or Virtual
Extension.
Issue 1.0
Level
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
2 - 479
2 3