NEC Univerge SV8100 Features And Specifications Manual page 120

Issue 1.0
Program
Program Name
Number
12-01-01 Night Mode Function Setup –
Manual Night Mode Switching
12-01-02 Night Mode Function Setup –
Automatic Night Mode Switching
12-02-01 Automatic Night Service Patterns
–Start Time
12-02-02 Automatic Night Service Patterns
–End Time
12-02-03 Automatic Night Service Patterns
–Operation Mode
2 - 96
Description/Comments
Turns Off (0) or On (1) any
extensions from activating Manual
Night Service.
According to a preset schedule,
Enable (1) or Disable (0) Automatic
Night Service for the system. Make
sure to set the Service Patterns in
Program 12-02-01, Program 12-02-
02 and Program 12-02-03.
Define the daily pattern of the
Automatic Mode Switching. Each
Mode Group has 10 patterns. These
patterns are used in Programs 12-03
and 12-04. The daily pattern consists
of 20 timer settings.
This option defines the starting time.
Define the daily pattern of the
Automatic Mode Switching. Each
Mode Group has 10 patterns. These
patterns are used in Programs 12-03
and 12-04. The daily pattern consists
of 20 timer settings.
This option defines the ending time.
Define the daily pattern of the
Automatic Mode Switching. Each
Mode Group has 10 patterns. These
patterns are used in Programs 12-03
and 12-04. The daily pattern consists
of 20 timer settings.
This option defines the operation
mode that the system should be in
during each time number.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1)
0 = Off
1 = On
(default = 0)
0000~2359
Refer to the SV8100
Programming Manual
for defaults.
0000~2359
Refer to the SV8100
Programming Manual
for defaults.
1~8
(default = 1 or 2
depending on time
pattern and time
number.)
Automatic Route Selection
Level
1 2 3