NEC Univerge SV8100 Features And Specifications Manual page 561

UNIVERGE SV8100
Program
Program Name
Number
20-31-05 Timer Class Timer Assignment –
Trunk Interdigits Time (Trunk I/D
Timer)
20-31-06 Timer Class Timer Assignment –
Hotline Time Start Time (Hotline
Start)
20-31-07 Timer Class Timer Assignment –
Ring No Answer Alarm Time
20-31-08 Timer Class Timer Assignment –
DIL/Incoming Ring Group No
Answer Time
20-31-09 Timer Class Timer Assignment –
DID Ring-No-Answer Time
20-31-10 Timer Class Timer Assignment –
Hold Recall Time (Non Exclusive
Hold)
20-31-11 Timer Class Timer Assignment –
Hold Recall CallBack Time (Non
Exclusive Hold)
20-31-12 Timer Class Timer Assignment –
Exclusive Hold Recall Time
20-31-13 Timer Class Timer Assignment –
Exclusive Hold Recall Callback
Time
20-31-14 Timer Class Timer Assignment –
Park Hold Time – Normal
SV8100 Features and Specifications Manual
Description/Comments
The system waits for this time to
expire before placing the call in a
talk state (Call Timer starts after
time expires, Voice Over and
Barge-In are not allowed until after
time expires).
A Ringdown extension
automatically calls its programmed
destination after this time.
If a trunk rings a multiline telephone
longer than this interval, the system
changes the ring cadence. This
indicates to the user that the call
has been ringing too long.
A DIL that rings its programmed
destination longer than this time
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
In systems with DID
Ring-No-Answer Intercept, this
interval sets the Ring-No-Answer
time. This interval is how long a DID
call rings the destination extension
before rerouting to the intercept ring
group.
A call on Hold recalls the extension
that placed it on Hold after this time.
This time works with the Hold
Recall Callback Time (Program 24-
01- 02).
A trunk recalling from Hold or Park
rings an extension for this time.
This time works with Hold Recall
Time or Park Hold Time. After this
time, the system invokes the Hold
Recall Time again. Cycling between
time Program 24-01-01 and 24-01-
02 and Program 24-01-06 and 24-
01-07 continues until a user
answers the call.
A call on Exclusive Hold recalls the
extension that placed it on Hold
after this time.
An Exclusive Hold Recall rings an
extension for this time. If not picked
up, the call goes back on System
Hold.
A call left parked longer than this
time, recalls the extention that
initially parked it.
Assigned Data
1
0~64800 (seconds)
(default = 5 seconds)
0~64800 (seconds)
(default = 5 seconds)
0~64800 (seconds)
(default = 60 seconds)
0~64800 (seconds)
(default = 0 seconds)
0~64800 (seconds)
(default = 20 seconds)
0~64800 (seconds)
(default = 90 seconds)
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 90 seconds)
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 90 seconds)
Issue 1.0
Level
2 3
2 - 537