NEC Univerge SV8100 Features And Specifications Manual page 549

UNIVERGE SV8100
Program
Program Name
Number
11-12-05 Service Code Setup (for Service
Access) – Cancel Camp-On
11-12-06 Service Code Setup (for Service
Access) – Switching of Voice Call
and Signal Call
11-12-07 Service Code Setup (for Service
Access) – Step Call
11-12-08 Service Code Setup (for Service
Access) – Barge-In
11-12-09 Service Code Setup (for Service
Access) – Change to STG
(Department Group) All Ring
11-12-10 Service Code Setup (for Service
Access) – Station Speed Dialing
11-12-11 Service Code Setup (for Service
Access) – Group Speed Dialing
11-12-12 Service Code Setup (for Service
Access) – Last Number Dial
11-12-13 Service Code Setup (for Service
Access) – Saved Number Dial
11-12-14 Service Code Setup (for Service
Access) – Trunk Group Access
11-12-15 Service Code Setup (for Service
Access) – Specified Trunk
Access
11-12-16 Service Code Setup (for Service
Access) – Trunk Access Via
Networking
11-12-17 Service Code Setup (for Service
Access) – Clear Last Number
Dialing Data
11-12-18 Service Code Setup (for Service
Access) – Clear Saved Number
Dialing Data
11-12-19 Service Code Setup (for Service
Access) – Internal Group Paging
11-12-20 Service Code Setup (for Service
Access) – External Paging
SV8100 Features and Specifications Manual
Description/Comments
Customize the Service Code,
which is to be used for cancelling
Camp-On.
Use to customize the switching of
voice call and signal call used for
service access.
Use to customize the step call
used for service access.
Determine what the service code
should be for an internal party to
use the Barge-In feature.
Use this option to set the service
code for ringing all members of a
Department Group.
Assign Service code for accessing
System Speed Dial bins.
Use to customize the group speed
dialing Service Codes used for
service access.
Assign a service code to use Last
Number Dial.
Customize the service code to be
used for dialing a saved number.
Use to customize the Service
Codes which are used for service
access.
Use to customize the Service
Codes which are used for specified
trunk access.
Use to customize the Service
Codes which are used for trunk
access via networking.
Assign a service code to clear the
Last Number Dial.
Define the service code for Clear
Save Number Dialing List if it is not
acceptable.
Define the service code for
accessing an internal paging
group.
External paging access code.
Service code setup.
Assigned Data
1
MLT, SLT
(default = 770)
MLT, SLT
(default = 712)
MLT, SLT
(default = 708)
MLT, SLT
(default = 710)
MLT, SLT
(default not assigned)
MLT, SLT
#
(default = 2)
MLT, SLT
#
(default = 4)
MLT, SLT
#
(default = 5)
MLT, SLT
(default = 715)
MLT, SLT
(default = 704)
MLT, SLT
#
(default = 0)
MLT, SLT
(default not assigned)
MLT, SLT
(default = 776)
MLT, SLT
(default = 785)
MLT, SLT
(default = 701)
MLT, SLT
(default = 703)
Issue 1.0
Level
2 3
2 - 525