NEC Univerge SV8100 Features And Specifications Manual page 500

Issue 1.0
Program
Program Name
Number
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
2 - 476
Description/Comments
Turns Off or On a user Class of Service
from automatically blocking outgoing
Caller ID information when a call is
placed. If block is enabled, the system
automatically inserts the Caller ID block
code 1831 (defined in Program 14-01-
21) before the user dialed digits (this
requires Program 14-02-10 to be
enabled). If block is disabled, the
system outdials the call just as it was
dialed by the user.
Turns Off or On an extension ability to
display the name and number of the
extension that dialed 911 (US Only).
Turns Off or On an extension user ability
to override the trunk access map
programming for outgoing calls.
Enable or Disable an extension user
ability to voice over to a busy virtual
extension.
Turns Off or On the extension ability to
receive a second call from a DID, DISA,
DIL, or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller to
ring through. If the destination
extension does not have a trunk or
CAP key available for the second
call and a previous call is ringing
the extension but has not yet been
answered, the second caller hears
busy regardless of this program
setting.
Turns Off or On the Caller ID display at
an extension.
Define whether an extension displays
the Caller Sub-Address.
Determine whether or not the CHECK
LIST message is displayed to indicate a
missed call
Turns Off or On an extension user ability
to enable Handsfree Answerback or
Forced Intercom Ringing for their
incoming Intercom calls.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
term
Cordless Lite II Terminal
D
Level
2 3