NEC Univerge SV8100 Features And Specifications Manual page 156

Issue 1.0
Related Features
Virtual Extensions
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-01-01 System Numbering – Service
Code
11-04-01 Virtual Extension Numbering
15-01-01 Basic Extension Data Setup –
Extension Name
15-01-05 Basic Extension Data Setup –
Restriction for Outgoing Disable
on Incoming Line
15-02-07 Multiline Telephone Basic Data
Setup – Automatic Hold for CO
Lines
2 - 132
Description/Comments
Use to set system numbering plan.
Assign virtual extension numbers.
Define the extension/virtual
extension name.
Enable (1) or Disable (0)
supervised dial detection for an
extension.
Assigned automatic hold condition
(or disconnect) for CO lines.
UNIVERGE SV8100
Assigned Data
1
Refer to Univerge
SV8100 System
Program Manual
Up to eight digits
1 201
2 202
3 203
~ ~
99 299
100 3601
~ ~
256 3857
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102,
etc.
0 = No
1 = Yes
(default = 0)
0 = Hold
1 = Disconnect (Cut)
(default = 1)
Call Arrival (CAR) Keys
Level
2 3