NEC Univerge SV8100 Features And Specifications Manual page 196

Issue 1.0
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup –
Incoming Type
24-02-11 System Options for Transfer –
No Answer Step Transfer
24-02-12 System Options for Transfer –
No Answer Trunk-to-Trunk
Transfer
24-04-01 Automatic Trunk-to-Trunk
Transfer Target Setup
Trunk-to-Trunk Forwarding – DID (3) Trunk Forwarding by Department Groups
Refer to Departmental Calling for additional Department Group programming.
Program
Program Name
Number
11-07-01 Department Group Pilot Numbers
– Dial
11-11-25 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Setup for Each
Extension Group
11-11-26 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Cancellation for Each
Extension Group
11-11-27 Service Code Setup (for Setup/
Entry Operation) – Destination of
Automatic Transfer Each
Extension Group
2 - 172
Description/Comments
Used to assign the incoming trunk
type for each trunk. There is one
item for each Mode. When using
Trunk-to-Trunk Forwarding the
trunks must be set for Normal (0).
Assign the amount of time each
transfer destination rings before
step transfer is performed.
This timer defines the amount of
time that elapses before the
automatic Trunk-to-Trunk Transfer
is performed.
Assign the Speed Dialing number
bin (0~1999) to a trunk and the
mode which should be used as the
destination of the Automatic Trunk-
to-Trunk Forwarding.
Description/Comments
Assign pilot numbers to the
Extension (Department) Groups you
set up in Program 16-02.
Customize the service code to be
used to set the Automatic Trunk
Forwarding feature for a Department
Group.
Customize the service code to be
used to cancel the Automatic Trunk
Forwarding feature for a Department
Group.
Customize the service code to be
used to set the destination for the
Automatic Trunk Forwarding feature
for a Department Group.
UNIVERGE SV8100
Assigned Data
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 0 seconds)
0~1999
(default = 1999)
Assigned Data
Up to eight digits
(default not assigned)
MLT, SLT
(default = 602)
MLT, SLT
(default = 603)
MLT
(default = 604)
Call Forwarding, Off-Premise
Level
1 2 3
Level
1 2 3