NEC Univerge SV8100 Features And Specifications Manual page 401

UNIVERGE SV8100
When using DID Call by Time Schedule and breaking out the Time Patterns, set the start
time to 00:00 and end time to 00:00 for this feature to operate correctly. Refer to
Time Schedule on page 2-374
DID Call by Time Schedule Priority is given to the pattern that is set manually. However,
when a time pattern changes with the time schedules set in Program 22-17, the pattern
applied by the Manual change is canceled and the Time Pattern is given priority
When Transfer Operation Mode is set to busy, call queuing must be turned off for it to work.
Default Setting
Disabled
Related Features
Central Office Calls, Answering
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Off-Hook Signaling
Paging, External
Programmable Function Keys
Station Message Detail Recording
Transfer
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
SV8100 Features and Specifications Manual
for more details.
Issue 1.0
DID Call by
.
2 - 377