NEC Univerge SV8100 Features And Specifications Manual page 365

UNIVERGE SV8100
Program
Program Name
Number
15-09-01 Virtual Extension Ring
Assignment
15-11-01 Virtual Extension Delayed Ring
Assignment
20-04-03 System Options for Virtual
Extensions – CAR/SIE/Virtual
Extension Delay Interval
22-01-04 System Options for Incoming
Calls – DIL No Answer Recall
Time
22-02-01 Incoming Call Trunk Setup
22-08-01 DIL/IRG No Answer Destination
SV8100 Features and Specifications Manual
Description/Comments
Individually program an extension
Virtual Extension key(s) to either
ring (1) or not ring (0).
Use to assign the delayed ringing
options for an extension Virtual
Extension or Virtual Extension
Group Answer keys (defined in
Program 15-09).
CAR Keys/SIE Keys/Virtual
Extensions set for Delayed Ringing
(see Program 15-11) ring the
extension after this interval.
A DIL that rings its programmed
destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
Use this option to set the feature
type for the trunk you are
programming.
If an incoming trunk call rings
longer than the DIL No Answer
Time (Program 22-01-04), it routes
to the destination you specify in
this option. Determine if the
destination should be a Ring
Group, In-Skin/External Voice Mail,
or Central Voice Mail.
Assigned Data
1
Mode 1:
0 = Not Ring
1 = Ring
(default = 0)
KY01 Mode 1:
0 = (No) Immediate
Ring
1 = (Yes) Delay Ring
(default = 0)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 0 seconds)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
Issue 1.0
Level
2 3
2 - 341