NEC Univerge SV8100 Features And Specifications Manual page 776

Issue 1.0
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-14-01 Class of Service Options for
DISA/E&M – First Digit
Absorption (Delete First Digit
Dialed)
20-14-02 Class of Service Options for
DISA/E&M – Trunk Group
Routing/ARS Access
20-14-03 Class of Service Options for
DISA/E&M – Trunk Group
Access
20-14-04 Class of Service Options for
DISA/E&M – Outgoing System
Speed Dial
20-14-05 Class of Service Options for
DISA/E&M – Operator Calling
20-14-06 Class of Service Options for
DISA/E&M – Internal Paging
20-14-07 Class of Service Options for
DISA/E&M – External Paging
20-14-08 Class of Service Options for
DISA/E&M – Direct Trunk Access
2 - 752
Description/Comments
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
For Tie Lines, Enable or Disable
the ability to absorb (ignore) the
first incoming digit. Use this to
make the tie trunk compatible with
3- and 4-digit Tie Line service.
This option does not apply to
DISA.
This option Enables or Disables a
DISA or tie trunk caller's ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
This option Enables or Disables a
DISA or tie trunk caller's ability to
access trunk groups for outside
calls (Service Code 704).
This option Enables or Disables a
DISA or tie trunk caller's ability to
use the System Speed Dialing.
This option Enables or Disables a
DISA or tie trunk caller's ability to
dial 0 for the telephone system
operator.
This option Enables or Disables a
DISA or tie trunk caller's ability to
use the telephone system Internal
Paging.
This option Enables or Disables a
DISA or tie trunk caller's ability to
use the telephone system External
Paging.
This option Enables or Disables a
DISA or tie trunk caller's ability to
use Direct Trunk Access (Service
Code 715).
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 =Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Multiple Trunk Types
Level
1 2 3