NEC Univerge SV8100 Features And Specifications Manual page 556

Issue 1.0
Program
Program Name
Number
11-16-07 Single Digit Service Code Setup
– Message Waiting
11-16-08 Single Digit Service Code Setup
– Voice Over
11-16-09 Single Digit Service Code Setup
– Access to Voice Mail
11-16-10 Single Digit Service Code Setup
– (Department) STG All Ring
Mode
11-16-11 Single Digit Service Code Setup
– Station Park Hold
11-20-01 Dial Extension Analyze Table –
Dial Digits
11-20-02 Dial Extension Analyze Table –
Type of Dials
Operation
None
2 - 532
Description/Comments
Use to customize the message
waiting Service Codes used when
a busy or ring back signal is heard.
Service code used for the Voice
Over feature.
Use to customize the access to
voice mail Service Codes used
when a busy or ring back signal is
heard.
Assign the Single Digit
(post-dialing) Service Code for All
Member Ring.
Customize the one-digit service
code to be used when placing a
call in Personal Park.
Use tables 01 ~ 128 to assign the
digits to be dialed using the Dial
Extension Analyze Tables. These
tables are used when Program
11-01-01 is set to option 9 = Dial
Extension Analyze. Up to eight
digits can be assigned
Assign the Type of Dial for the
Extension Analyze Table from
Program 11-20-01.
UNIVERGE SV8100
Assigned Data
1
(default = 0)
(default = 6)
(default = 8)
(default not assigned)
(default not assigned)
Dial (Up to eight digits:
#
0, 1~9, , , @)
Type of Dials:
0 = Not used
1 = Service Code
2 = Extension Number
5 = Operator Access
6 = F-Route Access
(default not assigned)
Flexible System Numbering
Level
2 3