NEC Univerge SV8100 Features And Specifications Manual page 338

Issue 1.0
Program
Program Name
Number
20-11-16 Class of Service Options (Hold/
Transfer Service) – Call Redirect
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restrict
Unsupervised Conference
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
2 - 314
Description/Comments
Turns On (1) or Off (0) a multiline
terminal user ability to transfer a call to a
predefined destination (such as an
operator, voice mail, or another
extension) without answering the call.
Turns On (1) or Off (0) the ability of an
extension user in a Department Group
to use the Trunk-to-Trunk Forwarding
service codes.
Allow (0) or Deny (1) answered
Transferred calls from recalling the
originating extension
Determine whether an extension Class
of Service should allow normal or
extended Park (0 = Normal for Program
24-01-06, 1 = Extended for Program
24-01-07).
Turns Off or On an extension ability to
receive Callbacks.
Allow (0) or Deny (1) an extension user
ability to set up a tandem/conference
call automatically when they hang up.
Allow or Deny an extension user ability
to initiate a Trunk-to-Trunk Transfer
(Tandem Trunking).
In an extension Class of Service, turns
On (1) or Off (0) the user ability to set
and cancel Call Forwarding for a CAR or
Virtual Extension.
Set the hold type when a trunk call is put
on hold by an extension.
Turns On or off an extensions user
ability to transfer a parked call.
Turns Off (0) or On (1) the Warning Tone
for Long Conversation (not for single line
telephones).
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Non Exclusive
Hold (Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Cordless DECT Terminals (US Only)
Level
1 2 3