NEC Univerge SV8100 Features And Specifications Manual page 398

Issue 1.0
When the secondary destination (Program 22-11-06) is set to Voice Mail, the Voice Mail protocol is based
on the first destination routing. When the incoming call is forwarded to the first destination by a busy
intercept, the Voice Mail protocol forwards busy calls. When the incoming call is routed to the first
destination by a ring-no-answer intercept, the protocol forwards ring-no-answer. The Voice Mail transfers
the calls to the mailbox number defined in Program 22-11-02.
Any valid DID number must be entered in the DID table (Program 22-11 or Program 22-17-01). If a valid DID number is
not entered, there is no ring destination for any incoming call to that number (the calls do not ring any extension in the
system).
If the first programmed destination is a Ring Group and the second Destination is Voice Mail, the call does not forward to
VoiceMail.
Calls Can Follow Ring Group Programming for Transferring Calls
An option was added to Program 22-11 which allows you to determine if the DID routing should use the
programmed ring group entry in Program 22-12-01 when transferring calls from a busy or no answer
number.
If DID digits match the conversion table but there is no extension, no Voice Mail, or Voice Mail did not boot
up, use Program 22-11-11 to decide what to do with the incoming call. Go to (1) normal ring (default) or
(0) caller hears a Busy Tone.
DID Call by Time Schedule
DID Call by Time Schedule allows for 100 programmed DID Conversion table entries (PRG 22-17-01) that
can be routed based on Time Patterns. Each DID Conversion table has a maximum of eight
programmable Time Patterns and each Time Pattern can reference one of the 2000 different Dial-In
Conversion table entries in PRG 22-11-01.
00:00
Time Pattern
PRG 22-17
PRG 22-11-01
100 incoming
PRG 22-11-02
Input Data
2 - 374
Example 1 (Automatic Change)
09:00
12:00
1 2
1 2
101 incoming
PRG 22-11-01 and PRG 22-11-02
Table No.
1
2
3
13:00
3
3
102 incoming 101 incoming
Receive Dial
No setting
No setting
No setting
UNIVERGE SV8100
18:00
4 5
2 1
100 incoming
Transfer Dial
100
101
102
Direct Inward Dialing (DID)
00:00