NEC Univerge SV8100 Features And Specifications Manual page 834

Issue 1.0
Program
Program Name
Number
20-13-29 Class of Service Options
(Supplementary Service) –
Paging Display
31-01-02 System Options for Internal/
External Paging – Page
Announcement Duration
31-03-01 Internal Paging Group Settings –
Internal Paging Group Name
31-04-01 External Paging Zone Group
31-05-01 Universal Night Answer/Ring
Over Page
31-06-01 External Speaker Control –
Broadcast Splash Tone before
Paging (Paging Start Tone)
31-06-02 External Speaker Control –
Broadcast Splash Tone after
Paging (Paging End Time)
31-06-04 External Speaker Control –
CODEC Transmit Gain Setup
31-06-05 External Speaker Control –
CODEC Receive Gain Setup
2 - 810
Description/Comments
Turns Off (0) or On (1) an
extension user ability to display
paging information.
Set the maximum allowable
duration for a Paging
announcement.
Assign name to Internal Paging
Groups (i.e., Page Zones). The
system shows the name you
program on the telephone display.
Assign each External Paging
Speaker to an External Paging
Group (1~8) used for accessing
the zone. If zones 1~8 are not
connected to PGD(2)-U( ) ADP,
set these unused zones to External
Paging Group 0.
Assign Universal Night Answer
ringing to each External Paging
zone. For each trunk port, make a
separate entry for each External
Paging Speaker.
Use this option to Enable or
Disable splash tone before Paging
over an external zone. If enabled,
the system broadcasts a splash
tone before the External Paging
announcement.
Assign option for each External
Paging Speaker (1~9).
Use to define the CODEC
transmitting gain settings for the
external speaker using an
amplifier.
Select the CODEC gain types
(1~32) for each External Page
Speaker.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64800 (seconds)
(default = 1200 seconds)
Up to 12 characters
Refer to Programming
Manual for table.
External Paging Speaker/
Zones: 1~9
Speaker 1 [PGD(2)-U( )]
= 1 (Group 1)
Speaker 2 [PGD(2)-U( )]
= 2 (Group 2)
Speaker 3 [PGD(2)-U( )]
= 3 (Group 3)
Speaker 4 [PGD(2)-U( )]
= 4 (Group 4)
Speaker 5 [PGD(2)-U( )]
= 5 (Group 5)
Speaker 6 [PGD(2)-U( )]
= 6 (Group 6)
Speaker 7 [PGD(2)-U( )]
= 7 (Group 7)
Speaker 8 [PGD(2)-U( )]
= 8 (Group 8)
Speaker 9
(CD-CP00-AU) = 1
(Group 1)
External Paging Speaker/
Zones: 1~9
0 = No Ringing (No)
1 = Ringing (Yes)
(default = 0)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
(default = 2)
1~63 (-15.5 ~ +15.5dB)
(default = 32)
External Paging Speaker/
Zone: 1~9
1~63 (-15.5 ~ +15.5dB)
(default = 32)
Paging, External
Level
1 2 3