NEC Univerge SV8100 Features And Specifications Manual page 523

UNIVERGE SV8100
Program
Program Name
Number
20-11-15 Class of Service Options (Hold/
Transfer Service) – VRS
Personal Greeting (Message
Greeting)
20-11-16 Class of Service Options (Hold/
Transfer Service) – Call Redirect
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang
Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restrict
Unsupervised Conference
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
SV8100 Features and Specifications Manual
Description/Comments
Turns Off or On an extension user
ability to dial Service Code 4 7 to
record, listen to or erase the
Personal Greeting Message.
Turns Off or On a multiline terminal
user ability to transfer a call to a
predefined destination (such as an
operator, voice mail, or another
extension) without answering the
call.
Turns Off or On an extension user
ability in a Department Group to use
the Trunk-to-Trunk Forwarding
service codes.
No Recall set to allow does not stop
Transferred calls from recalling
from a virtual extension
Determine if an extension Class of
Service should allow normal or
extended Park.
Turns Off or On an extension ability
to receive Callbacks
Allow or Deny an extension user
ability to set up a tandem/
conference call automatically when
they hang up.
Allow or Deny an extension ability
to initiate a Trunk-to-Trunk Transfer
(Tandem Trunking).
In an extension Class of Service,
turns Off or On an extension user
ability to set and cancel Call
Forwarding for a CAR or Virtual
Extension.
Set the hold type when a trunk call
is put on hold by an extension user.
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Deny
1 = Allow
(default = 0 for
COS 1~15)
0 = Normal
1 = Extended
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 499