NEC Univerge SV8100 Features And Specifications Manual page 677

UNIVERGE SV8100
Program
Program Name
Number
84-01-45 H.323 Trunk Basic Information
Setup – High-speed Signal Data
(FAX Procedure Signal)
84-01-46 H.323 Trunk Basic Information
Setup – TCF Operation Setting
84-01-47 H.323 Trunk Basic Information
Setup – The Maximum,
Low-speed Signal Data (Size of
Packet)
84-01-48 H.323 Trunk Basic Information
Setup – Network Transmission
Time-out
84-01-49 H.323 Trunk Basic Information
Setup – Eflag Beginning Timer
84-01-50 H.323 Trunk Basic Information
Setup – Eflag Stop Timer
84-01-51 H.323 Trunk Basic Information
Setup – The Former Line
Substitution of Scanning Line
84-01-52 H.323 Trunk Basic Information
Setup – Eflag Setting at Head
DIS
84-01-53 H.323 Trunk Basic Information
Setup – TFOP Protocol
84-01-54 H.323 Trunk Basic Information
Setup – NSF Superscription
84-01-55 H.323 Trunk Basic Information
Setup – ECM (Error Correction
Mode)
84-01-56 H.323 Trunk Basic Information
Setup – Enable Modified Read
Code
84-01-57 H.323 Trunk Basic Information
Setup – NSF Country Code
Setting
84-01-58 H.323 Trunk Basic Information
Setup – NSF Vendor Code
Setting
SV8100 Features and Specifications Manual
Description/Comments
Use to define the high-speed signal
data (FAX procedure signal) for
H.323.
Use to define the TCF operation
setting for H.323.
Use to define the the maximum,
low-speed signal data (Size of
packet) for H.323.
Use to define the network
transmission time-out for H.323.
Use to define the Eflag beginning
timer for H.323.
Use to define the Eflag stop timer
for H.323.
Use to define the the former line
substitution of scanning line for
H.323.
Use to define the Eflag setting at
head DIS for H.323.
Use to define the TFOP protocol for
H.323.
Use to define the NSF
superscription for H.323.
Use to define the ECM (error
correction mode) for H.323.
Use to define the enable modified
read code for H.323.
Use to define the NSF country code
setting for H.323.
Use to define the NSF vendor code
setting for H.323.
Assigned Data
1
0~2
(default = 0)
1 = Training signal
(TCF) of the fax is
locally generated and
checked.
2 = Training signal
(TCF) of the fax is
sent over the
.
network
(default = 1)
1~65535 bytes
(default = 1)
10~32000 seconds
(default = 150)
0~65535
(default = 2600)
0~65535
(default = 2300)
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 1)
0~65535
(default = 0)
0~65535
(default = 0)
Issue 1.0
Level
2 3
2 - 653