NEC Univerge SV8100 Features And Specifications Manual page 738

Issue 1.0
Related Features
Meet Me Conference
Meet Me Paging
Paging, External
Paging, Internal
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
10-21-04 CD-CP00-AU Hardware Setup –
External Source I/O Selection on
CD-CP00-AU
11-12-21 Service Code Setup (for Service
Access) – Meet-Me Answer to
Specified Internal Paging Group
11-12-22 Service Code Setup (for Service
Access) – Meet-Me Answer to
External Paging
2 - 714
Description/Comments
Define what the I/O ports on the
CD-CP00-AU are used for.
Use to customize the Service
Codes used for meet-me answer
to specified internal paging group
service access.
Use to customize the Service
Codes used for meet-me answer
to external paging service access.
UNIVERGE SV8100
Assigned Data
0 = External MOH (CN8)/
External Speaker(CN9)
1 = BGM source (CN8)/
External Speaker(CN9)
2 = External MOH (CN8)/
BGM source (CN9)
Relations between
CN number and
Relay number are
as follows:
CN8 = Relay2
CN9 = Relay1
(default = 1)
MLT, SLT
(default = 764)
MLT, SLT
(default = 765)
Meet Me Paging Transfer
Level
1 2 3