NEC Univerge SV8100 Features And Specifications Manual page 592

Issue 1.0
Related Features
Handsfree Answerback/Forced Intercom Ringing
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-11-62 Service Code Setup (for Setup/
Entry Operation) – Headset Ring
Volume Adjustment
15-02-41 Multiline Telephone Basic Data
Setup – Incoming Ring Setup
15-02-42 Multiline Telephone Basic Data
Setup – Incoming Off-Hook Ring
Setup
15-02-43 Multiline Telephone Basic Data
Setup – Headset Ring Duration
15-07-01 Programmable Function Keys
2 - 568
Description/Comments
If needed, change the service code
used to adjust the Headset Ring
Volume.
Determine if incoming calls ring the
speaker or headset.
Determine if incoming off-hook
ringing rings the speaker or the
headset.
If incoming ringing is set for headset,
set the duration the call rings the
headset before ringing the speaker.
Assign a function key for Headset
Operation (code 05).
UNIVERGE SV8100
Assigned Data
MLT
(default = 662)
0 = Speaker Normal
Ring
1 = Headset Ring
(default = 0)
0 = Speaker Off-Hook
Ring
1 = Headset Off-Hook
Ring
(default = 0)
0 = No Switch to
Speaker Ring
1 = 10 seconds
2 = 20 seconds
3 = 30 seconds
4 = 40 seconds
5 = 50 seconds
6 = 1 minute
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Headset Operation
Level
1 2 3