NEC Univerge SV8100 Features And Specifications Manual page 639

UNIVERGE SV8100
Program
Program Name
Number
10-12-09 CD-CP00-US Network Setup – IP
Address
10-26-01 IP System Operation Setup –
Peer to Peer Mode
15-05-15 Extension, Basic Setup – Peer to
CODEC Type
84-10-01 ToS Setup – ToS Mode
84-10-07 ToS Setup – Priority (D.S.C.P. -
Differentiated Services Code
Point)
84-11-28 Dterm IP CODEC Basic Setup –
Audio Capability Priority
84-22-01 DT700 Multiline Logon
Information Setup – User ID
84-22-02 DT700 Multiline Logon
Information Setup – Password
84-22-03 DT700 Multiline Logon
Information Setup – User ID
Omission
84-22-04 DT700 Multiline Logon
Information Setup – Log Off
84-22-05 DT700 Multiline Logon
Information Setup – Nick Name
SV8100 Features and Specifications Manual
Description/Comments
Set for IPLA.
Use to Enable or Disable the Peer
to Peer feature for SIP IP stations.
Use this program to set the
registered IP Phone Codec type –
Reference Program 84-11 Dterm IP
Codec Basic Information.
When Input Data is set to 1, Item
No. 07 is invalid. When Data is set
to 2, Item No. 02 ~ 06 are invalid.
DSCP (Differentiated Services
Code Point).
Use to set voice (RTP packet)
encoding parameters.
Input the User ID for each Personal
ID Index (1-512) when using auto or
manual registration in 10-46-01.
IP Multiline terminals only
support numerical user IDs,
not alphanumeric.
Input the Password for each
Personal ID Index (1-512) when
using auto or manual registration in
10-46-01.
Enable or Disable User ID
Omission.
Used when the registration
mode (10-46-01) is set to
manual. When the phone
prompts for a login, the
previous user ID will appear so
the user only has to enter the
password.
Enable or Disable the ability for the
IP Multiline to log off or be
overridden.
Input the Personal ID from terminal
automatically when log on again.
Assigned Data
1
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 172.16.0.10)
0 = Off
1 = On
(default = 1)
1-Type 1
2-Type 2
3-Type 3
4-Type 4
5-Type 5
(default = 1)
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
(default = 0)
0~63
(default = 0)
0 = G.711_PT
2 = G.729_PT
(default = 0)
Up to 32 characters
(default not assigned)
Up to 16 characters
(default not assigned)
0 = Off1 = On
(default = 0)
0 = Off1 = On
(default = 1)
Up to 32 characters
(default not assigned)
Issue 1.0
Level
2 3
2 - 615