NEC Univerge SV8100 Features And Specifications Manual page 249

UNIVERGE SV8100
Program
Program Name
Number
15-06-01 Trunk Access Map for
Extensions
15-07-01 Programmable Function Keys
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision
20-02-15 System Options for Multiline
Telephones – Caller ID Display
Mode
20-06-01 Class of Service for Extensions
20-10-07 Class of Service Options
(Answer Service) – Automatic
Off-Hook Answer
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
21-01-15 System Options for Outgoing
Calls – Outgoing Disable on
Incoming Line (Toll Restriction)
21-01-16 System Options for Outgoing
Calls – Supervise Dial Detection
Timer
SV8100 Features and Specifications Manual
Description/Comments
Assign Trunk Access Maps to
extensions.
Use to assign functions to multiline
terminal line keys.
Use this option to Enable (1) or
Disable (0) disconnect supervision
for the system trunks.
Use to define the Caller ID display
mode for multiline terminals.
Assign a Class of Service (1~15) to
extensions.
Turns Off (0) or On (1) an extension
to use Universal Auto Answer (no
service code required).
Turns Off (0) or On (1) the
extension ability to use Continued
Dialing, which allows DTMF signal
sending while talking on extension.
Select whether an extension should
display the reason a call is being
transferred to their extension (Call
Forward Busy, Call Forward No
Answer, DND).
Enable (1) or Disable (0) the
Outgoing Disable on Incoming Line
feature.
With the Outgoing Disable on
Incoming Line feature, if dial tone is
not detected after the extension
answers an incoming line, the
system determines the call is
unable to complete and releases
the DTMF receiver.
Assigned Data
1
Trunks 1~200
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0 = Disable
1 = Enable
(default = 1)
0 = Name and Number
(Both)
1 = Name
2 = Number
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Disable
1 = Enable
(default = 1)
0~64800 (seconds)
(default = 20 seconds)
Issue 1.0
Level
2 3
2 - 225