NEC Univerge SV8100 Features And Specifications Manual page 44

Issue 1.0
Program
Program Name
Number
35-06-01 SMDR Account Code Setup –
Verified Account Code
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your
system has Optional Account Codes enabled. You may also be able to use this procedure for incoming
calls. This procedure is not available for single line telephones.
1. Dial .
- OR -
Press your Account Code key (Program 15-07 or SC 751: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and
If Account Codes are hidden, each digit you dial shows
3. Dial .
- OR -
Press your Account Code key (Program 15-07 or SC 751: code 50).
To enter an Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting the
system prompt you for your Account Code. You may also use this procedure if your system has Optional
Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
You can press a line key or dial a code (except 0) to access a trunk. Refer to
2-229 for more information.
2. Dial .
- OR -
Press your Account Code key (Program 15-07 or SC 751: code 50).
2 - 20
Description/Comments
Use this table to enter Account
Codes into the Verification Account
Code List. You can enter up to 2000
codes with three ~ six digits, using
#
the characters 0 ~ 9 or . Use the
LK1 to enter a wild card. For
example, the entry @234 means
the user can enter 0234-9234.
).
#
on the telephone display.
UNIVERGE SV8100
Assigned Data
Up to 16 digits
#
Enter: 1~9, 0, , @
(@ = Wild Card)
(default not assigned)
Central Office Calls, Placing on page
Account Code Entry
Level
1 2 3