NEC Univerge SV8100 Features And Specifications Manual page 499

UNIVERGE SV8100
Program
Program Name
Number
20-08-02 Class of Service Options
(Outgoing Call Service) – Trunk
Outgoing Calls
20-08-03 Class of Service Options
(Outgoing Call Service) – System
Speed Dialing
20-08-04 Class of Service Options
(Outgoing Call Service) – Group
Speed Dialing
20-08-06 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Override
20-08-07 Class of Service Options
(Outgoing Call Service) – Repeat
Redial
20-08-08 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Dial Block
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
SV8100 Features and Specifications Manual
Description/Comments
Turns Off or On outgoing trunk calling
for the extension.
Turns Off (0) or On (1) an extension
user ability to make outbound calls
using system speed dial numbers.
Turns Off or On an extension user ability
to make outbound calls using group
speed dial numbers.
Turns Off or On Toll Restricting Override
(Service Code 663).
Turns Off or On an extension user to
use Repeat Redial.
Turns Off or On an extension user ability
to use Dial Block.
Turns Off or On Ringdown Extension for
extensions with this COS.
Turns Off or On an extension to force
Handsfree Answerback or Forced
Intercom Ringing for outgoing Intercom
calls.
When an extension is set to ring mode
for ICM calls, enabling this option
prevents callers from changing the call
to voice announce mode.
Turns Off or On an extension user ability
to use Department Group Step Calling.
Determine if the ISDN calling line
identity presentation and screening
indicators should be allowed.
Used to Enable or Disable Call Address
Information for each Class Of Service.
Issue 1.0
Level
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
2 - 475
2 3