NEC Univerge SV8100 Features And Specifications Manual page 404

Issue 1.0
Program
Program Name
Number
22-04-01 Incoming Extension Ring
Group Assignment
22-09-01 DID Basic Data Setup –
Expected Number of Digits
22-09-02 DID Basic Data Setup –
Received Vacant Number
Operation
22-10-01 DID Translation Table Setup
22-11-01 DID Translation Number
Conversion – Received
Number
22-11-02 DID Translation Number
Conversion – Target Number
22-11-03 DID Translation Number
Conversion – DID Name
22-11-04 DID Translation Number
Conversion – Transfer
Operation Mode
2 - 380
Description/Comments
Assign extensions to Ring Groups.
Calls ring the extensions according
to programming in Program 22-06.
For each DID Translation Table
(1~20), enter the number of digits
the table expects to receive from the
CO (eight maximum). For example,
for a table used with 3-digit DID
service, enter 3.
Use this option to Enable or Disable
Vacant Number Intercept.
Assign the start and end range of
DID Translation Table entries
(1~2000) to each DID Translation
Table (1~20).
For each DID Translation Table
entry (1~2000), specify the digits
received by the system.
For each DID Translation Table
entry (1~2000), specify the
extension the system dials after
translation.
For each DID Translation Table
entry (1~2000), specify the name
that should show on the dialed
extension display when it rings.
For each DID Translation Table
entry (1~2000), specify the condition
required to transfer the call to the
destination defined in Program 22-
11-05 and Program 22-11-06.
UNIVERGE SV8100
Assigned Data
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring for
incoming Ring Group 1
calls. No other
extensions ring for
incoming Ring Group 1
calls.
1~8
(default = 2)
0 = Disconnect
1 = Transfer
(default = 0)
Trans Table 1 = 001~200
Trans Table 2 = 201~400
Trans Table 3 = 401~600
Trans Tabgle 4 601~700
Conv Table 001~100 =
01~99,00
Conv Table 201~300 =
01~99,00
Conv Table 301~500 =
01~99,00
Conv Table 401~600 =
01~99,00
Conv Table 001~100 =
101~199,100
Conv Table 201~300 =
101~199,100
Conv Table 301~500 =
101~199,100
Conv Table 401~600 =
101~199,100
Maximum 12 digits
(default not assigned)
0 = No Transfer
1 = Busy
2 = No Answer
3 = Both
(default = 0)
Direct Inward Dialing (DID)
Level
1 2 3